ET 200L
- Дизайн
Станция распределенного ввода-вывода SIMATIC ET 200L состоит из:
- терминального блока и
- электронного блока.
Подключение к полевой шине PROFIBUS DP производится через интерфейс, встроенный в электронный блок. Дальнейшее расширение станции невозможно.
Терминальный блок
Терминальный блок предназначен для установки электронного блока и подключения внешних входных и выходных цепей, что позволяет производить замену электронных блоков без демонтажа внешних соединений. Терминальный блок крепится на стандартную профильную шину DIN. Монтажное положение может быть любым. В станции ET 200L может использоваться 4 типа терминальных блоков:
- для установки 16-канального электронного модуля с подключением внешних цепей через контакты под винт
- для установки 16-канального электронного модуля с подключением внешних цепей через контакты-защелки
- для установки 32-канального электронного модуля с подключением внешних цепей через контакты под винт
- для установки 32-канального электронного модуля с подключением внешних цепей через контакты-защелки
Электронный блок
Электронные блоки содержат цепи дискретных входов и выходов, а также интерфейс для подключения к сети PROFIBUS-DP. В станции ET 200L могут использоваться электронные блоки следующих типов:
- 16DI: с 16 дискретными входами =24В
- 16DO: с 16 дискретными выходами =24В/0,5 A
- 32DI: с 32 дискретными входами =24В
- 32DO: с 32 дискретными выходами =24В/0,5 A
- 16DI/16DO: 16 дискретных входов =24В и 16 дискретных выходов =24В/0,5 A.
- 16 DO: 16 дискретных выходов ~120В/1 A
- 16 DO: 16 дискретных выходов ~120В/2 A
- 16 DI: 16 дискретных входов ~120В
- 8 DI/8 RO/2 A: 8 дискретных входов ~120В, 8 выходов в виде замыкающих контактов реле, до 2А на контакт
Адрес станции в PROFIBUS DP
Сетевой адрес станции задается вращающимся переключателем, вмонтированным в электронный блок. В станциях, устанавливаемых на концах сегмента сети PROFIBUS DP, должны устанавливаться терминальные резисторы.
Принадлежности
Для маркировки внешних цепей станции могут быть использованы специальные этикетки, укрепляемые на фронтальной панели электронных блоков. Этикетки поставляются на стандартных листах формата DIN A4, что позволяет наносить все необходимые надписи машинным способом.
Стандартным вариантом подключения внешних цепей является 2-проводное подключение. Если для подключения внешних цепей необходимо использовать 3- или 4-проводные схемы, то для этой цели могут быть заказаны дополнительные соединительные элементы, дополняющие терминальный блок.
- Функции
Принцип действия
Ведущее DP-устройство обращается к входам-выходам станции ET 200L теми же способами, что и к входам-выходам системы локального ввода-вывода.
Управление обменом данными через PROFIBUS DP осуществляет ведущее DP-устройство и интерфейс станции ET 200L.
Станция ET 200L поддерживает широкий спектр диагностических функций, которые позволяют выявлять:
- ошибки в передаче данных через PROFIBUS DP
- ошибки в работе электронных блоков
- исчезновение напряжения =24 В для питания внешних цепей
Результаты диагностики могут оцениваться:
- с помощью светодиодов станции ET 200L
- с помощью программатора/ компьютера, оснащенного COM PROFIBUS или STEP 7
- с помощью центрального процессора ведущего DP-устройства
- Технические данные
6ES7 131-1BH01-0XB0
6ES7 131-1BL01-0XB0
Supply voltages
Rated value
- 24 V DC
Yes
Yes
- Reverse polarity protection
Yes
Yes
Hardware configuration
Rack
- Required terminal block
TB 16L
TB 32L
Connection method
Inputs/outputs
Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
PROFIBUS DP
Transmission rate, max.
1.5 Mbit/s
1.5 Mbit/s
Direct data exchange (slave-to-slave communication)
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)
Digital inputs
Number of digital inputs
16
32
Input voltage
- Rated value, DC
24 V
24 V
- for signal "0"
-30 to 5 V
-30 to 5 V
- for signal "1"
13 to 30 V
13 to 30 V
Input current
- for signal "1", typ.
5 mA
5 mA
Input delay (for rated value of input voltage)
- for standard inputs
- at "0" to "1", min.
2 ms
2 ms
- at "0" to "1", max.
4.5 ms
4.5 ms
Cable length
- Cable length for NAMUR input, shielded, max.
1 000 m
1 000 m
Galvanic isolation
between PROFIBUS DP and all other circuit components
Yes
Yes
Galvanic isolation digital inputs
- between the channels
No
No
- between the channels and PROFIBUS DP
Yes
Yes
Environmental requirements
Operating temperature
- horizontal installation, min.
0 °C
0 °C
- horizontal installation, max.
60 °C; 40°C for other mountings
60 °C; 40°C for other mountings
Air pressure
- permissible range, min.
795 hPa
795 hPa
- permissible range, max.
1 080 hPa
1 080 hPa
Relative humidity
- Operation, min.
5 %
5 %
- Operation, max.
95 %; RH class 2 in accordance with IEC 1131-2
95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
- Operation, checked according to IEC 60068-2-6
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
- checked according to IEC 60068-2-27
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Degree of protection
IP20
Yes
Yes
Dimensions and weight
Dimensions
- Width
145 mm
145 mm
- Height
60 mm
60 mm
- Depth
60.5 mm
60.5 mm
6ES7 132-1BH00-0XB0
6ES7 132-1BL00-0XB0
Supply voltages
Rated value
- 24 V DC
Yes
Yes
- Reverse polarity protection
Yes
Yes
Mains buffering, min.
20 ms
20 ms
Load voltage 2L
- Rated value (DC)
24 V; 1L , 2L , 3L
24 V; 1L , 2L , 3L
Current consumption
from load voltage L1 (without load), max.
50 mA; per load group (L1 or L2 / L3 )
100 mA; per load group (L1 or L2 / L3 )
from supply voltage L , max.
70 mA; L4 / L5
70 mA; L4 / L5
Power losses
Power loss, typ.
5 W
7 W
Hardware configuration
Rack
- Required terminal block
TB 16L
TB 32L
Communication functions
Bus protocol/transmission protocol
PROFIBUS DP
PROFIBUS DP
Connection method
Inputs/outputs
Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
PROFIBUS DP
Transmission rate, max.
1.5 Mbit/s
1.5 Mbit/s
SYNC capability
Yes
Yes
Direct data exchange (slave-to-slave communication)
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)
Digital outputs
Number of digital outputs
16
32
Short-circuit protection
Yes; Electronic
Yes; Electronic
Response threshold, typ.
0.7 A
0.7 A
Limitation of inductive shutdown voltage to
typ. (L1 or L2 / L3 ) -55 V
typ. (L1 or L2 / L3 ) -55 V
Lamp load, max.
5 W
5 W
Controlling a digital input
Yes
Yes
Output voltage
- Rated value (DC)
24 V
24 V
- for signal "1", min.
Ua - 3 V
Ua - 3 V
Output current
- for signal "1" rated value
0.5 A
0.5 A
- for signal "1" permissible range for 0 to 60 °C, max.
0.5 A
0.5 A
- for signal "0" residual current, max.
1 mA
1 mA
Output delay with resistive load
- 0 to "1", max.
50 ms
50 ms
- 1 to "0", max.
200 ms
200 ms
Parallel switching of 2 outputs
- for increased power
No
No
- for redundant control of a load
Yes; only outputs of the same group
Yes; only outputs of the same group
Switching frequency
- with resistive load, max.
100 Hz
100 Hz
- with inductive load, max.
0.5 Hz
0.5 Hz
- on lamp load, max.
8 Hz
8 Hz
Aggregate current of outputs (per group)
- all other mounting positions
- up to 40 °C, max.
2 A
2 A
- up to 60 °C, max.
4 A
4 A
- horizontal arrangement, up to 40 °C, max.
3 000 mA
3 000 mA
- horizontal arrangement, up to 60 °C, max.
2 000 mA
2 000 mA
Load resistance range
- lower limit
41 Ω
41 Ω
- upper limit
28 000 Ω
28 000 Ω
Cable length
- Cable length, shielded, max.
1 000 m
1 000 m
- Cable length unshielded, max.
600 m
600 m
Interrupts/diagnostics/status information
Alarms
- Alarms
No
No
Diagnoses
- Diagnostic functions
Yes
Yes
Diagnostics indication LED
- Bus fault BF (red)
Yes
Yes
- Status indicator digital output (green)
Yes
Yes
- Status indicator digital input (green)
Yes
Yes
- Monitoring 24 V voltage supply ON (green)
Yes
Yes
Isolation
Isolation checked with
500 VDC
500 VDC
Galvanic isolation
between PROFIBUS DP and all other circuit components
Yes
Yes
Galvanic isolation digital outputs
- between the channels
No
No
- between the channels and PROFIBUS DP
Yes; Optocoupler
Yes
Environmental requirements
Operating temperature
- horizontal installation, min.
0 °C
0 °C
- horizontal installation, max.
60 °C; 40°C for other mountings
60 °C; 40°C for other mountings
Air pressure
- permissible range, min.
795 hPa
795 hPa
- permissible range, max.
1 080 hPa
1 080 hPa
Relative humidity
- Operation, min.
5 %
5 %
- Operation, max.
95 %; RH class 2 in accordance with IEC 1131-2
95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
- Operation, checked according to IEC 60068-2-6
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
- checked according to IEC 60068-2-27
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Degree of protection
IP20
Yes
Yes
General information
Vendor identification (VendorID)
0016h
0011h
Dimensions and weight
Dimensions
- Width
145 mm
145 mm
- Height
60 mm
60 mm
- Depth
60.5 mm
60.5 mm
Weight
- Weight, approx.
130 g
150 g
6ES7 133-1BL01-0XB0
Supply voltages
Rated value
- 24 V DC
Yes
- Reverse polarity protection
Yes
Hardware configuration
Rack
- Required terminal block
TB 32L
Connection method
Inputs/outputs
Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection
PROFIBUS DP
Transmission rate, max.
1.5 Mbit/s
Direct data exchange (slave-to-slave communication)
Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)
Digital inputs
Number of digital inputs
16
Input voltage
- Rated value, DC
24 V
- for signal "0"
-30 to 5 V
- for signal "1"
13 to 30 V
Input current
- for signal "1", typ.
5 mA
Input delay (for rated value of input voltage)
- for standard inputs
- at "0" to "1", min.
2 ms
- at "0" to "1", max.
4.5 ms
Cable length
- Cable length for NAMUR input, shielded, max.
1 000 m
Digital outputs
Number of digital outputs
16
Short-circuit protection
Yes; Electronic
Output voltage
- Rated value (DC)
24 V
- for signal "1", min.
Ua - 3 V
Output current
- for signal "1" permissible range for 0 to 60 °C, max.
0.5 mA
- for signal "0" residual current, max.
1 mA
Switching frequency
- with resistive load, max.
100 Hz
- with inductive load, max.
0.5 Hz
- on lamp load, max.
8 Hz
Aggregate current of outputs (per group)
- up to 60 °C, max.
4 A
Cable length
- Cable length, shielded, max.
1 000 m
Galvanic isolation
between PROFIBUS DP and all other circuit components
Yes
Galvanic isolation digital inputs
- between the channels
No
- between the channels and PROFIBUS DP
Yes
Environmental requirements
Operating temperature
- horizontal installation, min.
0 °C
- horizontal installation, max.
60 °C; 40°C for other mountings
Air pressure
- permissible range, min.
795 hPa
- permissible range, max.
1 080 hPa
Relative humidity
- Operation, min.
5 %
- Operation, max.
95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
- Operation, checked according to IEC 60068-2-6
Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
- checked according to IEC 60068-2-27
Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Degree of protection
IP20
Yes
Dimensions and weight
Dimensions
- Width
145 mm
- Height
60 mm
- Depth
60.5 mm
6ES7 193-1CH00-0XA0
6ES7 193-1CH10-0XA0
6ES7 193-1CH20-0XA0
6ES7 193-1CL00-0XA0
6ES7 193-1CL10-0XA0
Dimensions and weight
Dimensions
- Width
145 mm
145 mm
191 mm
191 mm
191 mm
- Height
100 mm; Height with electronics block from top edge of DIN rail (with bus connector 6ES7 972-0CA30-0XA0): 82 mm
100 mm; Height with electronics block from top edge of DIN rail (with bus connector 6ES7 972-0CA30-0XA0): 82 mm
100 mm; Height with electronics block from top edge (with bus connector ): 98.5 mm
100 mm; Height with electronics block from top edge of DIN rail (with bus connector 6ES7 972-0CA30-0XA0): 82 mm
100 mm; Height with electronics block from top edge of DIN rail (with bus connector 6ES7 972-0CA30-0XA0): 82 mm
- Depth
40.5 mm
40.5 mm
40.5 mm
40.5 mm
40.5 mm
Weight
- Weight, approx.
230 g
230 g
283 g
350 g
350 g
- Дальнейшая информация
Брошюры
Информационные материалы для загрузки можно найти в Internet по адресу:
http://www.siemens.com/simatic/infocenter
6ES7131-1BH01-0XB0 | SIMATIC DP, ЭЛЕКТРОННЫЙ БЛОК ДЛЯ ET 200L, 16 ДИСКРЕТНЫХ ВХОДОВ =24В | ||
6ES7131-1BL01-0XB0 | SIMATIC DP, ЭЛЕКТРОННЫЙ БЛОК ДЛЯ ET 200L, 32 ДИСКРЕТНЫХ ВХОДА =24В | ||
6ES7132-1BH00-0XB0 | SIMATIC DP, ЭЛЕКТРОННЫЙ БЛОК ДЛЯ ET 200L, 16 ДИСКРЕТНЫХ ВЫХОДОВ =24В/0.5 A | ||
6ES7132-1BL00-0XB0 | SIMATIC DP, ЭЛЕКТРОННЫЙ БЛОК ДЛЯ ET 200L, 32 ДИСКРЕТНЫХ ВЫХОДА =24В/0.5 A | ||
6ES7133-1BL01-0XB0 | SIMATIC DP, ЭЛЕКТРОННЫЙ БЛОК ДЛЯ ET 200L, 16 ДИСКРЕТНЫХ ВХОДОВ/ 16 ДИСКРЕТНЫХ ВЫХОДОВ =24В/0.5 A | ||
6ES7193-1CH00-0XA0 | SIMATIC DP, ET 200L, ТЕРМИНАЛЬНЫЙ БЛОК TB16L, 16-КАНАЛЬНЫЙ, КЛЕММ С ВИНТОВЫМИ КОНТАКТАМИ | ||
6ES7193-1CH10-0XA0 | SIMATIC DP, ET 200L, ТЕРМИНАЛЬНЫЙ БЛОК TB16L, 16-КАНАЛЬНЫЙ, КЛЕММ С ПРУЖИННЫМИ КОНТАКТАМИ | ||
6ES7193-1CL00-0XA0 | SIMATIC DP, ET 200L, ТЕРМИНАЛЬНЫЙ БЛОК TB32L, 32-КАНАЛЬНЫЙ, КЛЕММ С ВИНТОВЫМИ КОНТАКТАМИ | ||
6ES7193-1CL10-0XA0 | SIMATIC DP, ET 200L, ТЕРМИНАЛЬНЫЙ БЛОК TB32L, 32-КАНАЛЬНЫЙ, КЛЕММ С ПРУЖИННЫМИ КОНТАКТАМИ | ||
6ES7193-1FH20-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 1-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 16-КАНАЛЬНЫЙ, КЛЕММ С ВИНТОВЫМИ ЗАЖИМАМИ | ||
6ES7193-1FH30-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 2-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 16-КАНАЛЬНЫЙ, КЛЕММ С ВИНТОВЫМИ ЗАЖИМАМИ | ||
6ES7193-1FH50-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 1-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 16-КАНАЛЬНЫЙ, КЛЕММ С ПРУЖИННЫМИ КОНТАКТАМИ | ||
6ES7193-1FH60-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 2-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 16-КАНАЛЬНЫЙ, КЛЕММ С ПРУЖИННЫМИ КОНТАКТАМИ | ||
6ES7193-1FL20-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 1-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 32-КАНАЛЬНЫЙ, КЛЕММ С ВИНТОВЫМИ ЗАЖИМАМИ | ||
6ES7193-1FL30-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 2-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 32-КАНАЛЬНЫЙ, КЛЕММ С ВИНТОВЫМИ ЗАЖИМАМИ | ||
6ES7193-1FL50-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 1-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 32-КАНАЛЬНЫЙ, КЛЕММ С ПРУЖИННЫМИ КОНТАКТАМИ | ||
6ES7193-1FL60-0XA0 | SIMATIC DP, ET 200L, ДОПОЛНИТЕЛЬНЫЙ 2-РЯДНЫЙ ТЕРМИНАЛЬНЫЙ БЛОК, 32-КАНАЛЬНЫЙ, КЛЕММ С ПРУЖИННЫМИ КОНТАКТАМИ | ||
6ES7193-1BH00-0XA0 | SIMATIC DP, ET 200L, МАРКИРОВОЧНЫЕ ЭТИКЕТКИ ДЛЯ 16-КАНАЛЬНЫХ ЭЛЕКТРОННЫХ БЛОКОВ, 1 ЛИСТ С 10 ЭТИКЕТКАМИ | ||
6ES7193-1BL00-0XA0 | SIMATIC DP, ET 200L, МАРКИРОВОЧНЫЕ ЭТИКЕТКИ ДЛЯ 32-КАНАЛЬНЫХ ЭЛЕКТРОННЫХ БЛОКОВ, 1 ЛИСТ С 10 ЭТИКЕТКАМИ | ||
6ES7972-0BA30-0XA0 | SIMATIC DP, СОЕДИНИТЕЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ К PROFIBUS, ДО 1.5 МБИТ/С, С НАКЛОННЫМ ОТВОДОМ КАБЕЛЯ, 15 X 58 X 34 MM, БЕЗ ТЕРМИНАЛЬНОГО РЕЗИСТОРА, БЕЗ ГНЕЗДА ДЛЯ ПОДКЛЮЧЕНИЯ ПРОГРАММАТОРА | ||
6ES7972-0BA52-0XA0 | SIMATIC DP, ШИННЫЙ ОЕДИНИТЕЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ К СЕТЯМ PROFIBUS ДО 12 МБИТ/С, ОТВОД КАБЕЛЯ ПОД УГЛОМ 90 ГРАДУСОВ, 15,8 X 59 X 35,6 MM (ШXВXГ), IPCD, ТЕХНОЛОГИЯ FAST CONNECT, БЕЗ РАЗЪЁМА ДЛЯ ПОДКЛЮЧЕНИЯ ПРОГРАММАТОРА | ||
6ES7972-0BA52-0XB0 | SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, 15,8 X 59 X 35,6 MM (WXHXD), IPCD TECHOLOGY FAST CONNECT, WITHOUT PG SOCKET 100 PIECES PER PACKAGING UNIT | ||
6ES7972-0BB52-0XA0 | SIMATIC DP, ШИННЫЙ ОЕДИНИТЕЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ К СЕТЯМ PROFIBUS ДО 12 МБИТ/С, ОТВОД КАБЕЛЯ ПОД УГЛОМ 90 ГРАДУСОВ, 15,8 X 59 X 35,6 MM (ШXВXГ), IPCD, ТЕХНОЛОГИЯ FAST CONNECT, С РАЗЪЁМОМ ДЛЯ ПОДКЛЮЧЕНИЯ ПРОГРАММАТОРА | ||
6ES7972-0BB52-0XB0 | SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, 15,8 X 59 X 35,6 MM (WXHXD), IPCD TECHOLOGY FAST CONNECT, WITH PG SOCKET 100 PIECES PER PACKAGING UNIT |
Комментарии
Пока нет комментариев